New Products

Solenttech Semi-Flexible Monocrystalline Solar Panels

The unique design of these extreemly lightweight (50% of conventional modules) and robust panels makes them suitable for numerous applications.Their price permformance is the principle advantage as the monocrystalline cell is highly efficient, typically around 15%.They are Robust, glass free and have a very strong terminal box.

Their low profile means there is less visual impact and also means they are suitable for installation on to vehicles as there is less wind noise and vibration.The ability to fit the panel to flat/ slightly curved surfaces means easy installation as no mounting frame is required, it also means adhesive can be used which makes the panel very difficult to steal. The absence of glass and the robust construction means the panel can be walked on and that it is difficult to vandalise.

There are two models the ST35F(35Wp / 2Kg) and the ST70F(70Wp / 3Kg).These two modules are in stock and can be ordered now. They have been manufactured in Europe in accordance with ISO 9001-2002 and conform to CE,TUV and IEC 61215 specifications.

Solenttech Rigid Glass Monocrystalline Solar Panels
The unique design of these extreemly lightweight (50% of conventional modules) and robust panels makes them suitable for numerous applications.Their price permformance is the principle advantage as the monocrystalline cell is highly efficient, typically around 15%.They are Robust and have a very strong terminal box.

The Solenttech rigid glass panel is a high quality monocrystalline silicon cell module. It has toughened low iron glass and a tri-wall backing sheet for total environmental protection.This provides the longest life expectancy even under extreme climatic conditions such as ice, hail, snow, storms and extreme humidity having no effect on the solar panels.

The efficient silicon technology and the anti-reflection layer permit optimal efficiency. This guarantees high performance during low irradiation and months with diminished light. The ST-Series solar panels have a 25 year design life.

Each Solar panel is individually measured during and after the manufacturing process under the highest quality and ISO conditions. Every panel is tested under STC conditions and are certified.

The panels have a robust and seawater resistant aluminium frame, the frame profile provides stability and easy installation, also the solar panels have a waterproof junction box

These panels can be used for a variety of applications including boats, camper vans, holiday homes, summerhouses and specialist applications.

There are eight models from 25Wp through to 125Wp).These modules are in stock and can be ordered now. They have been manufactured in Europe in accordance with ISO 9001-2002 and conform to CE,TUV and IEC 61215 specifications.

Studer 'Xtender' Inverter Charger
A New inverter-charger,The Studer XTENDER will meet the expectations and the needs of the solar, mobile and backup markets.This new range of Inverter-Chargers is now available using Digital Signal Processor(DSP) Technology. The Xtender Series consists of 4 products starting at 2500va through to 4000va, 5000va and 7000VA. The Xtender range is now available.

The main features of the Xtender series are the inverter, battery charger and transfer system. These functions can be combined and controlled in a totally automatic mode providing an exceptional optimisation and management of the available energy resource.

The function Smart-Boost offers the possibility to assist the source with the function Smart-Boost. This enables the user to add the inverter power to another source,such as a genset or shorepower, even in case of special loads (inductive, asymetrical, high crest factor).

The Power Increase option with the implementation of several units,offers the user a 3-phase source or to configure the units in parallel (up to 3) to increase the power available. Up to 9 inverters of the Xtender series can shall be linked together. It is also possible to add an Xtender to almost any existing inverter and thus increase the power available.

Studer I130 Inverter for 19" Rack-Telecoms systems

This inverter was originally designed and produced for a major Swiss telecom operator.The I130 - 130VA/48VDC is now available for all telecom users. The I130 is made for 19” rack shelve mountings. The I130 complies with: CE Directive: 89/336/EEC (EMC) - LVD 73/23/EEC: IEC 60950 (Safety) RFI Immunity : EN 61000-4-2Harmonic current emissions :EN61000-3-2 Conducted and radiated emission: EN 55014, EN 55022 Radiated emission : ETSI EN 300 386 V1.3.2 (Telecom) Emission of narrowband noise : ETSI 132-2 (Telecom) EMC immunity : ETSI EN 300 386 V1.3.2: 2003 (Telecom)
The I13 is built and supplied with a dual DC mains input and secondary supply with common positive (0.6 m cables with 6.2 mm Faston).
Other options are a battery controller type SBM-01, designed for 12V and 24V batteries and a voltage pre-scaler type SBM-PS-01 to adapt the controller to 48V batteries.Additional options for these models are a connection kit, Type SBM-CAB-20 and a communication kit, Type SBM-COM. The connection kit consists of a 20 m cable (3 x 2 x 0.5mm2), 2 fuses and 2 fuseholders. The communication kit consists of an RS232 interface box, 1.8 m of 9p DSUB serial cable and its software.All products are available now.These inverters and accessories are available now and have already been successfully installed by telecom users.

Studer HPSI Industrial Inverter for 19" Rack users
This series of Industrial Sinewave Inverters ( Studer HPSI ) in a 19'' box is the Rack version of the Studer SI series. The SI range of inverters are well known for their outstanding reliability by professional users.The new HPSI series are built for 19'' rack users and therefore well suited for industrial and professional applications.There are three models; the HPSI 2212, HPSI 4424, and HPSI 5048. The frequency is 50Htz/230VAC(Crystal control)and range from 2200W through to 5000W.

There are a number of options such as a choice between a stand-by (load detection adjustable from 0,3 to 20W) and the unique TWINPOWER option.The TWINPOWER option allows the permanent use of very small loads (like security and alarm systems), with an outstanding efficiency 10 times higher than any other inverter and a no-load consumption of 0,5W.Other standard features are remote control, 3-phase for 3 x 400V systems.An alarm option with no potential (0,5A - 60V) is available. It warns the user (alarm or control system) when the inverter has been stopped due to a failure or is out of use. It is off when the inverter is working.The inverters are virtually maintenance free.These inverters are available now.
Studer SI Industrial Sine Wave Inverter for 19" Rack users
This series of 19" Rack Sine Wave Inverters is a direct development of the Studer SI series. This range of inverters are well known for their outstanding reliability by professional users.The new series are built for 19'' rack users and therefore well suited for industrial and professional applications.The frequency output is 50Htz/230VAC(Crystal control) and 12vdc, 24vdc and 48vdc input. The inverters deliver a high and steady efficiency, outstanding overload capability thanks to the combined use of a toroidal transformer and a MOS power stage and ultra-fast regulation.

Other featues include overload,overheat,short-circuit and reverse polarity protection;adjustable stand-by-level from a low threshold and no noise thanks to HF-switching > 20 kHz.The SI 1200IND allows the possibility to configure 3 inverters (min. SI 1200IND) in a 3-phased 3 x 400V stand-alone grid.

There are a number of options such as a choice between a stand-by (load detection adjustable from 0,3 to 20W) and the unique TWINPOWER option.The TWINPOWER option allows the permanent use of very small loads (like security and alarm systems), with an outstanding efficiency 10 times higher than any other inverter.An alarm option with no potential (0,5A - 60V) is available. It warns the user (alarm or control system) when the inverter has been stopped due to a failure or is out of use. It is off when the inverter is working.The inverters are virtually maintenance free.These inverters are now available.

Fronius-Solarix 550I/550RI & 900I/900RI- The sine wave inverter and solar regulator combined in one device.

For the first time there is a combination of an efficient sinewave inverter and a proven solar charge controller in one device. The perfect solution for 220V stand-alone systems. Your advantages: simple installation, short assembling time and high reliability. The completely new product features: exact state of charge display and charge-dependent load decrease also for AC loads.

Of course, the inverter is also available as a stand-alone version for non-photovoltaik applications. With triple overload ability for safe starting of critical loads and three operating conditions for all applications. The housing guarantees simple operation and safe mounting is well-known Fronius and Steca quality.The RI models have an integrated solar charge controller.

Fronius IG Central Inverters-The Solar Power Station

IG central inverters are suitable for pv systems starting with an AC output power of 24 kW through to 40kWp and work with a completely new system configuration. There is not only one power stack converting the electricity but also 9, 12 to 15 printed circuit boards that share the work, depending on the output class. The reason for this is that it is well-known that the energy yield increases in part-load areas if smaller power stacks are operated at higher capacity. Therefore, every Fronius IG central inverter works with several smaller power stacks that switch on or off completely automatically depending on irradiance so that they can always deliver maximum power.

For further information please contact us.